Retro cars blog

Posts Tagged ‘retro cars’

1957 Chrysler 300C retro car

Sales of the C300 were fueled by its success on the stock car circuit. The C300 dominated the sands of Daytona Beach, Florida where it won the stock production class and took home the Tom McCahill trophy. From 1955 through 1957 it was the fastest American car.

In 1959, a 300D driven at Utah’s Bonneville Salt Flats by Norm Thatcher set a new Class E speed record of 156.387 mph. During the same year, Brewster Shaw achieved a quarter-mile time of 16 seconds with a trap speed of 94 mph at Daytona Beach, Florida.

For 1956, Chrysler increased the displacement of its Hemi engine to 5.8 liters and changed the name to 300B. With 355 horsepower, the V8 engine had one horsepower per cubic inch, an achievement that very few manufacturers were able to claim.

The letters continued to climb the alphabet annually until the 300L of 1965 (the letter I was skipped). They became known as the ‘letter cars’. In 1959, the 392 hemi was replaced with the 413 cubic-inch Golden Lion wedge-head design engine. In 1962, the 300 Sport series became available along side the 300H. The 300, without a letter designation was continued until 1971. In 1970, the 300 Hurst was produced, built by Chrysler and modified by the Hurst Company. The modifications included two-tone paint, special striping, spoiler on the deck lid, and wheels. The 300 name was again revived in 1979 as the 300 Special Edition, but endured a short life span. It was based on the Cordoba platform and available only in white with red leather interior.

1957 Chrysler 300C in Showroom

n 1955, Chrysler introduced the C300. The ‘C’ stood for coupe and the 300 was the horsepower rating of the original Hemi engine equipped with , two four barrel carbs, solid lifters, special manifolds, and enlarged dual exhausts. This vehicle gave the Chrysler Corporation a performance and sporty image, a much needed persona in this post World War II era. Many European manufacturers, such as Jaguar and MG, had introduced high powered, small, responsive sports cars. American manufacturers countered with the Chevrolet Corvette and the Ford Thunderbird. The Chrysler 300 was a performance car with a contemporary ‘Forward Look’ designed by ex-Studebaker stylist Virgil Exner. The design was void of the popular chrome sides which was prevalent during this era. It was simple but aggressive gentleman’s car.
The Chrysler 300 was outfitted with a hemispherical (Hemi) combustion chamber 5.4 litre V-8 that produced 300 horsepower and matted to a performance modified two-speed ‘PowerFlite’ automatic gearbox. The body came from the New Yorker; rear quarter moldings were compliments of the Windsor. The two piece grille came from the Imperial. An improved suspension was implemented to provided sporty and responsive handling. The base price was $4,055.

1957 Chrysler 300C Exotic retro car

For 1956,Chrysler increased the displacement of its Hemi engine to 5.8 liters and changed the name to 300B. With 355 horsepower, the V8 engine had one horsepower per cubic inch, an achievement that very few manufacturers were able to claim.

The letters continued to climb the alphabet annually until the 300L of 1965 (the letter I was skipped). They became known as the ‘letter cars’. In 1959, the 392 hemi was replaced with the 413 cubic-inch Golden Lion wedge-head design engine. In 1962, the 300 Sport series became available along side the 300H. The 300, without a letter designation was continued until 1971. In 1970, the 300 Hurst was produced, built by Chrysler and modified by the Hurst Company. The modifications included two-tone paint, special striping, spoiler on the deck lid, and wheels. The 300 name was again revived in 1979 as the 300 Special Edition, but endured a short life span. It was based on the Cordoba platform and available only in white with red leather interior.

Even with eleven years of production, less than 17,000 were produced. The bodystyle’s available were either a two door hardtop or convertible. The convertible was not available during 1955, 1956, and 1963.

1966 Chrysler Newport limousine

The name Newport was first used by Chrysler on a 1940 showcar of which five actual vehicles were produced. Between 1961 and 1981 the Newport was a name used by the Chrysler division of the Chrysler Corporated used as both a hardtop body designation and for its entry level model.

Unveiled in 1940, the Chrysler Newport Phaeton was a 2-door low production roadster than utilized an I8 engine that was linked to a 3-speed manual transmission. Only produced for one year, the first generation Newport was based on the Chrysler New Yorker and was designed by Chrysler designer Ralph Roberts. A total of five units were produced. Chrysler founder Walter P. Chrysler had one that he used as a personal vehicle. Another owner was actress Lana Turner. The 1941 indianapolis 500 race featured the Newport Phaeton as the pace car.

From 1949 through 1961 the second generation of Newport was featured to designate the 2-door hardtop body style in Chrysler‘s lineup. A new hardtop Newport model was placed in each Chrysler series, Saratoga, the Windsor and the New Yorker. Orginally, the totally redesigned ’49 Chrysler Town and Country was proposed as a hardtop, but in the end the body style only appeared during the model’s final year in 1950.

1966 Chrysler Newport Classic car

In 1961 Chrysler revived the Newport name for their full-size entry-level model. Priced at $2,964, the Newport was strategically placed to fill the price gap between Dodge and Chrysler that emerged when DeSota was deleted. Quite successful, the Newport comprised the bulk of Chrysler production. The base Newport sedans were detrimmed versions of Chrysler‘s traditional upmarket models that featured hubcaps rather than full-wheel covers, very plain interiors and a minimal amount of exterior trim. Unfortunately, in the long run, cheapening the brand’s cache with an inexpensive model wasn’t good for Chrysler.

The ’61 Newport was available to the buying public as either a 2-door convertible, 2-door hardtop, 4-door sedan, 4-door hardtop and 4-door station wagon. Though most Newports were equipped with the 305 hp 383 in? V8, the base engine was the 361 in? V8 engine that was rated at 265 hp. The trademark fins were removed for the 1962 model year. For 1963 the Newport was restyled next to the New Yorker and Chrysler 300. This body style remained until 1964. The Newport received the small, chrome-topped fins again in 1964.

The fourth generation Newport was assembled at Jefferson Assembly Plant in Detroit Michigan. Redesigned on the then-new Chrysler C platform, the next Newport ran from 1965 through 1968. The Newport station wagon was renamed the Chrysler Town and Country.

Assembled in Belvidere, Illinois, the fifth generation of the Newport was again built on the C-body platform. Redesigned for the 1969 model year, the Newport now featured the ‘Fuselage Styling’ that would eventually become symbolic of Chrysler‘s full-size vehicles until the end of the 1973 model year.

1966 Chrysler Newport American car

After 1970, Newport convertibles were discontinued. In 1978 production of the C-body Newport also ended along with the Chrysler New Yorker. During the previous year, related Dodge and Plymouth C-body car had already been dropped. The American car industry’s last true two-door and four-door hardtops were offered with the 1978 Newport.

A newly resized Newport was introduced in 1979 on the Chrysler R platform which was a derivative of the circa 1962 Chrysler B platform. This downsized model reduced model availability to a single ‘pillared hardtop’ 4 door sedan. Chrysler went about the reduction of their vehicle a different way from GM and Ford who downsized their big cars by chopping with an ax. Chrysler improved fuel efficiency by reducing weght but retaining as much of the traditional full-size look and feel as possible.

A much more attractive vehicle was built from this process, but unfortunately some of the weight-saving measures proved to be more trouble then they were worth. The plastic brake wheel-cylinder pistons that had the tendency to swell and bind up the brakes following a couple of years of service. Another new innovation where chrome-plated aluminum bumpers that were replaced in 1980 with a newer and stronger steel rear bumper.

Sales were strong at the beginning of 1979, but unfortunately due to Chrysler’s unsteady financial condition, along with tightening oil and gasoline supplies, all of the R-body models were discontinued following a short run of 1981 models. Chrysler began to shift towards smaller front-wheel drive vehicles and the Newport was replaced with the front-wheel drive Chrysler Executive for 1983.

1980 Dodge Mirada Luxury sedan

A very rare vehicle, the Dodge Mirada was a hardtop coupe manufactured by Chrysler from 1980 through 1983. Based on Chrysler’s J body platform, the Mirada replaced the Dodge Magnum. The Mirada is identical to two other vehicles that Chrysler also manufactured at the same era, the Cordoba and the Imperial. Three engine options were available, an 85 hp Slant Six, a 130 hp 318 V8 and a 150 hp 360 V8. The Mirada was last manufactured in 1983 and at the end of its production year, only 5,120 units were sold.

The Mirada was a sturdy reliable little car, but unfortunately it didn’t become very popular during its three years of production. A mid-sized, rear-wheel drive coupe, the production numbers were very low, and less than 53,000 units were sold during its lifetime. During its production run, the Mirada would remain virtually unchanged with the exception of paint colors and engines. In 1983 the Mirada was replaced with the Chrysler 600. Basically, the Mirada was fairly doomed from the start in the market. Rear wheel drive had gone out of fashion in the car industry quite some time ago, and unfortunately even the true Plymouths were going out of style with their boat-like appearance.

1980 Dodge Mirada Targa

The Mirada was introduced as a luxury coupe, and it did indeed feature luxury items that would have been found in American models during, such as AM/FM radios with cassette players, various power options and leather upholstery.

In introducing the Mirada, Chrysler was also attempting to succeed on the NASCAR front as well. Lee Iaccoca personally requested Richard Petty to campaign a Mirada in NASCAR. Several drivers, including Petty built race ready test vehicles and tested them. Unfortunately the Mirada was tested around 8pm slower than other GM and Ford vehicles of the day and Petty and other drivers chose to go with another model. Arlington Racing did decide to go with the car and campaigned it from 1981 through 1984 racing seasons and managed 15 top-ten finishes during those years.

The main driver was Buddy Arrington; number 67, who ended up carrying the flag for Chrysler in NASSCAR after Petty Enterprises went to GM. The Marida was mainly used as a short-track car, while using a ’81-83 Imperial on superspeedwars. Several other drivers, including Dave Marcis and Dick May did choose to run the Mirada several times in 1981. Unfortunately the vehicles either broke down or finished several laps behind the leaders.

1980 Dodge Mirada stylish Limousine

The Mirada used transverse torsion bars in its suspension in the front and leaf springs with a sway bar in the rear. A ‘Sport Handling Package’ was offered on the Mirada and it included heavy-duty shock absorbers, torsion bar bushings, springs and anti-sway bars in both the rear and front. The braking system used drum brakes in the rear and power assisted disc brakes in the front.

Several different variations of rooflines were offered on the Mirada. Base models received a basic metal roof with a chrome beauty strip that reached from the bottom of the opera windows and across the roof. Buyers that wanted their Mirada to feature a sportier look could choose either a power sunroof, or a glass T-top roof. An even more luxurious option would be to choose either a vinyl landau roof or a cabriolet roof.

Every year except 1983 the T-tops and Landau were available, and the Cabriolet top could be purchased anytime. Unfortunately the power sunroof wasn’t very popular and was only available for 1980 and 1981.

Several basic wheel options were available, base models came with 15′ steel wheels with turbine-like hubcaps. Another option was polished ten-spoke, 15′ aluminum wheels with bright chrome center caps and painted section.

On the inside, the Mirada was available in a selection of styles and colors, though the most often chosen interior color was dark red. In the base vehicle, the dashboard was black with a faux woodgrain finish that surrounded the center console and gauges. The CMX featured a brushed aluminum finish that replaced the woodgrain. Options on the seating were either vinyl bucket seats, a 60/40 split cloth bench seat or leather bucket seats. The Mirada could be chosen with either a column shift or floor shift, while the bench seat was only available with the column shifter. Available steering wheels were either an interior –matched two-spoke wheel with horn buttons in the spokes. The CMX featured the Mopar ‘Tuff Wheel’ as the standard steering wheel in 1980 and 1981. The base models featured manual windows but the CMX could be purchased with power windows as an option.

1988 Dodge Diplomat Classic car

Dodge first used the name ‘Diplomat‘ in 1950 to designate their 2-door hardtop bodystyle. The name would endure until 1954. It re-appeared in 1975 as a trim package on the Royal Monaco two-door hardtop. In 1977, it became its own model line and served as a replacement for the Coronet in Dodge‘s mid-sized line-up. It was based on the Dodge Aspen and wore an M-body. Mounted on the bonnet was a 225 cubic-inch six-cylinder engine as the base powerplant. An optional 5.2L and 5.9L V8 were available. After 1984, the Diplomat was only available with the 5.2L V8 unit.

1988 Dodge Diplomat Muscle car

1988 Dodge Diplomat Limousine

The Dodge Diplomat was a mid-size car and it was manufactured from 1977 to 1989 by the Chrysler Corporation’s Dodge brand and practically identical to the Chrysler LeBaron of 1977, the Plymouth Caravelle sold in Canada, and the Plymouth Gran Fury from 1982. It was also sold in Mexico between 1980 and 1981 as the Dodge Dart, and in Colombia as the Dodge Coronet.

1977 saw the return of the Diplomat as a full model line rather than as the name of a particular body style. It replaced the Monaco in Dodge‘s new downsized mid-size lineup. The new Diplomat was based on the Dodge Aspen, designated the M-body. While the Aspen had the F-body, the M-bodies were related to it: the wheelbase and suspension were identical and doors and body panels often interchangeable. Hence, another M-body sedan, such as the 1989 Chrysler Fifth Avenue, had interchangeable doors with the 1976 Aspen. Like the Aspen, the Diplomat had coupe and station wagon variants.

The Diplomat was offered with a base 225 cu in (3.7 L) six-cylinder engine. In 318 cu in (5.2 L) V8 form (and an optional 360 cu in (5.9 L)) it, and its Plymouth Gran Fury/Caravelle twin, were widely favored as a police car both in the US and Canada. After 1984, the only engine offered was the 318 cu in (5.2 L) V8.

Following the demise of the Dodge St. Regis R-body in 1981, the Diplomat remained, becoming the largest sedan in the Dodge lineup, despite technically being a mid-size car. Dodge would not market another truly full-size car (at least based upon U.S. U.S. Environmental Protection Agency? (EPA) passenger volume statistics) until the Monaco debuted as a 1990 model.

In 1982, the coupe and station wagon were discontinued and Canada’s Plymouth version of the Diplomat came south of the border. The Plymouth Caravelle was offered in the US as the Plymouth Gran Fury.

1964 Dodge 330 Lightweight Superstock Muscle car

1964 Dodge 330 Factory Lightweight (aluminum front end), Bob Harrop and Crescent Dodgeoriginal factory Super Stock car, showing 49 miles on the odometer and original interior, restored to original race condition by Rick Demarco, 426 Max Wedge engine by Jerry Stine, paint and lettering just as raced in 1964, this is the real deal factory lightweight sponsored by Dodge driven by ‘Harrop the Arab’ multiple magazine features.

1964 Dodge 330 Lightweight Superstock Retro car

1964 Dodge 330 Lightweight Superstock Sports car

1958 Dodge Coronet Exotic car

This 1958 Dodge Coronet Super D-500 Convertible was offered for sale at the 2007 Sports and Classic Car Auction presented by The Worldwide Group, in Hilton Head Island, SC where it was estimated to sell for $125,000 – $175,000. It was offered without reserve, which was a rather daring move considering the value of the vehicle. This car is outfitted with the Super D-500 V8 engine that displaces 361 cubic-inches and produces 325 horsepower. There is a torque flight automatic transmission and four-wheel power drum brakes.

Virgil Exner’s design influences were prominent in Chrysler Corporation vehicles during the mid-1950s, as evident by the finned cars that took the market by storm. The Chrysler C300 was created to satisfy NASCAR homologation purposes, and variations of this masterpiece would continue for more than ten years.

At the Dodge and DeSoto marques, only slight changes were on the horizon. The Adventurer was given a dual quad setup similar to the C300 and offered superior performance to most other cars on the road. For Dodge, their D-500 was their performance pinnacle that kept its owners smiling a quarter-mile at a time. Above the D-500 was the Super D-500.

The Dodge D-500, Plymouth Fury, and Desoto Adventurer were introduced in 1956 with the D-500 being the most rare. These super performance machines were not ‘add ons’ or dealer options, but a model in all respects. The D-500 was given a heavy duty suspension, larger exhaust system, larger and lighter brakes, limited paint colors and schemes, special high performance engine and more. The result was astonishing, as the 1956 D-500 set or broke a total of 306 race records.

1958 Dodge Coronet retro car

In 1949 Dodge introduced the Coronet which was the top trim level offered by Dodge. It was similar to the Meadowbrook models in many respects, deviating in their interior appointments and minor differences with trim. The base level four-door sedan bodystyle was offered for under $1930. The top of the line version was the two-door station wagon which had seating for six and cost $2865. An L-head six-cylinder engine produced just over 100 horsepower could be found under the hood. A three-speed transmission with Fluid-Drive was standard equipment.

For 1950 the Dodge Coronet continued to be Dodge‘s top-of-the-line vehicle. It still was very similar to the Meadowbrook; it include all of its features plus added addition chrome trim on the wheels, rear fender guards and was adorned with the ‘Coronet‘ name proudly displayed on the exterior of the vehicle. Little changed for the following year. For 1952 the eight-passenger sedan was no longer offered. In 1953 the Dodge Coronetincorporated an air scoop on its hood. Under the Ram hood ornament could be found the word ‘Dodge V-8‘ for the eight-cylinder variants. The Hemi head overhead valve V8 engine was capable of producing 140 horsepower. The six-cylinder unit produced 103 horsepower.

In 1954 the Coronet name was used on the intermediate trim levels. Chrome trim could be found throughout the exterior of the vehicle including a chrome strip that ran along the middle of the body. In script letters, the name ‘Coronet‘ could now be found on the sides of the rear fenders. The base price for the four-door six-passenger sedan was $2110. The top of the line bodystyle was the four-door Sierra with seating for six and would set the buyer back $2695. The Coronet made an appearance at the Indy 500 where the convertible body style was the official pace car.

In 1956 the Dodge Coronet was restyled and grew by six-inches, became wider, and now sat closer to the ground. They were now the base trim level for Dodge. Both the six and eight cylinder engines now produced more horsepower. The eight-cylinder unit was capable of 175 horsepower. Tri-colored paint schemes were not uncommon. In the front was a new grille that was divided intro two separate openings. The parking lights were incorporated into the grille. The windshield was a classy wraparound design. Sales were very positive as the public agreed with the design and the vehicles mechanical abilities. Riding on the wings of success, Dodge made the wise decision to not mess with the design for 1956. The side trim and taillights were slightly modified. Tail fins could now be found protruding from the rear. A push-button transmission was now offered as optional equipment. This technology had been borrowed from Chrysler and proved to be rather popular with many.

1958 American retro car-Dodge Coronet

In 1956 the Dodge Coronet was restyled and grew by six-inches, became wider, and now sat closer to the ground. They were now the base trim level for Dodge. Both the six and eight cylinder engines now produced more horsepower. The eight-cylinder unit was capable of 175 horsepower. Tri-colored paint schemes were not uncommon. In the front was a new grille that was divided intro two separate openings. The parking lights were incorporated into the grille. The windshield was a classy wraparound design. Sales were very positive as the public agreed with the design and the vehicles mechanical abilities. Riding on the wings of success, Dodge made the wise decision to not mess with the design for 1956. The side trim and taillights were slightly modified. Tail fins could now be found protruding from the rear. A push-button transmission was now offered as optional equipment. This technology had been borrowed from Chrysler and proved to be rather popular with many.

In 1956, Dodge created a true ‘sleeper’ car. The Coronet D-500 appeared to be similar to other Coronet‘s but hidden under the hood was a 315 cubic-inch V8 that could pump-out 260 horsepower. It was able to go from zero-to-sixty in under nine seconds. One of the rules to compete in NASCAR was that at least 500 identical models had to be produced. The Coronet D-550 was a purpose-built vehicle intended for the NASCAR circuit. It featured a 315 cubic-inch Hemi V8 that produced 285 horsepower. In addition to a larger engine, the suspension, tires, brakes, and transmission were all modified to create a highly competitive, very effective muscle car / racing machine.

The Coronet was again restyled in 1957. Dodge began incorporating its ‘Forward Look’ design. The wheelbase grew, as did its length. The car was lowered and now sat even closer to the ground. One of the most recognizable features were the large tail fins. The front headlights were placed below headlight ‘brows’. A chrome strip ran the entire length of the vehicle on both sides. Chrome trim could be found throughout the vehicle, encompassing lgihts and grille openings. The base engine was the L-head six-cylinder engine that produced 138 horsepower. Eight-cylinder engines were available.

Picture of 1958 Dodge Coronet classic retro car

In 1957 the D-500 was replaced by the D-501. The ’500′ series was a high-performance option offered on all series. The Coronet D-501 featured a 354 cubic-inch Hemi V8 that produced 340 horsepower. Only 101 examples were produced. The suspension was updated to include torsion bar front suspension and a rear, heavy duty shock absorbers and leaf spring suspension.

The grille and headlights were the most significant changes for the Dodge Coronet for 1958. The headlights were now quad units. Dodge focused on improving the engines, which they did, with all engines of the ‘wedge’ single rocker head design. The top of the line engine was the 361-cubic-inch V8 with fuel-injection which was capable of an astonishing 333 horsepower. The Dodge name could be found in block letters along the front edge of the hood.

In 1959 the Dodge Coronet was given even larger fins. The brows over the headlights became even more exaggerated. They grew in length, width, wheelbase and were lowered, closer to the ground. A 383-cubic-inch V8 engine was available which produced 345 horsepower in its Super D-500 format. The buyers were treated to an extensive list of options, one of them being the Swivel-Seat option. The seat, with the push of a lever, could swing out to meet its occupant. Another option offered by Dodge was the self-leveling rear air suspension called LevelFlite. The name ‘Dodge‘ could be found in block letters on the trunk lid. The ‘Coronet‘ name was in script and appeared on the front fender.

The Coronet name did not appear on a Dodge vehicle in 1960. It re-appeared in 1965 as a mid-sized muscle car featuring a 426 cubic-inch Hemi engine that produced 425 horsepower. It was now an intermediate-sized vehicle. The bodyshell rested on a 117-inch wheelbase. The base trim level for the Coronet was outfitted with a 224-cubic-inch six-cylidner engine. The Dodge name was proudly displayed in block letters across the front of the hood. The Coronet name was in script along the front fender tip.

1957 Dodge Regent Retro car

The Dodge Regent for 1957 was the Canadian version of the Dodge/DeSoto dealers’ version of the Plymouth Savoy. It used the Savoy’s seat upholstery, door panels, instrument panels, and exterior trim. The engine was a 303 cubic-inch V8 unit with a 4-barrel carburetor producing around 240 horsepower. Other engines available include a 318 Cubic-inch V8 with dual four-barrel carburetors.

1957 Dodge Regent Classic American car

1954 Dodge Wayfarer convertible

In February, 1949 Dodge introduced the Wayfarer series. There was a 2-door with a rear seat, a 2 passenger coupe, and a Sports Roadster. These three body-styles sat atop a 115 inch wheelbase. During the initial year of production, 9,342 coupes were produced. Total production of the Sport Roadster was 5,420 examples and 49,054 sedans. The Wayfarer was a low-priced vehicle in the Dodge line-up. The sedan sold for $1,756 and weighed 3,180 pounds, the coupe sold for $1,629 and weighed 3,065 pounds. The roadster could be purchased for $1,745 and weighed 3,145 pounds.

1954 Dodge Wayfarer Roadster

The vehicles featured a 230 cubic-inch Flathead 6 cylinder engine that produced 103 horsepower. It came standard with a 3-speed transmission and was void of a radio or a heater. The lifespan of the clutch was extended by fluid coupling between the engine and the clutch. A ‘semi-automatic’ transmission was available as optional equipment. On the Sports Roadster the windows were side curtains that could be stored behind the passenger seat when not in use. Roll-up windows replace the curtains during the later part of 1949.

1954 Dodge Wayfarer Classic Cabriolet

1954 Dodge Firearrow Classic car

Created by the exquisite American car designer Virgil Exner, the Dodge Firearrow was introduced in 1954 as part of a four part series and built by Ghia of Turin, Italy. The Firearrow II and Firearrow IV; ‘Dreams’ are the only two convertible Firearrows in the world. There were a total of four vehicles built between 1953 and 1954. The bodies of these vehicles were constructed at Ghia using the chassis of stock 1954 Dodge convertibles.

A true roadster, the Firearrow I was painted red and gray with a yellow interior with maroon piping. The first model had dual headlights and the wheels were full wheel covers with body side molding that wrapped all the way around the car. The Firearrow I featured exposed exhaust pipes, two on each side that rode low on the car’s flanks. An additional touch of Italian styling was featured on a wood-rimmed steering wheel.
Today the vehicle is on display at Petersen’s Museum.

1954 Model of classic retro car-Dodge Firearrow Concept

The 1954 Firearrow II was also a true roadster that was painted a subdued yellow color. Very similar in appearance to the Firearrow I, the main difference was that the body side molding didn’t wrap around the car, but ended at the headlamps and taillights. The modified version of the original vehicle, the Firearrow II retained the mockup’s two-place seating and striking frameless windshield. The full hub caps were also replaced by chrome-plated wire wheels and new single headlights replaced the dual. The split bumper was also changed from the Firearrow I and replaced with a more aggressive ‘mouth’ horizontally bisected by an uninterrupted bumper. The toothy look was achieved by five vertical design elements on the bumper.

A 2-seater Sport Coupe was introduced in 1954, the Firearrow III, also called the Firebomb. Much more civilized than the original Firearrow, the III was painted a light metallic blue. With racer/flyer Betty Skelton behind the wheel at the Chrysler proving grounds, the Firebomb clocked at 143.44mph, set a women’s closed-course record. The dual headlights were brought back on this third edition along a concave grille cut with narrow verticals. The Sport Coupe featured a hardcore element with its wraparound backlight. Crash protection both front and rear was supplied by modest bumperettes.

1954 Dodge Firearrow Roadster

Also dubbed the Firebomb, the Firearrow IV was a stunning red convertible 4-seater, that featured black and white diamond interior. Basically a convertible version of the Firebomb, the newest edition is now in the Blackhawk collection as a black vehicle with black and white ‘tuck’n Roll’ interior. Both the yellow Firearrow II and the red Firearrow IV, the last of the collection have received honors at Meadowbrook and Amelia island Concours d’Elegance. These vehicles sold for $1.1 million each.

Chrysler unfortunately made the decision not to proceed into production. These vehicles are but a great moment in automotive history and the only survivors of the early series of Chrysler concept cars.

1954 Ford Comete Monte Carlo coupe

The Comete was a personal project of Francois Lehideux, a designer formerly with Renault. In 1950 Ledhidex took over as the president of Ford. He decided that his newest prestige model should be developed independently of the Ford organization, and to do this, he chose Facel-Metallon to undergo this project.

The Comete project was designed in complete secrecy by Daninos in Italy without even the Ford‘s own design studio ever knowing until the Comete was unveiled at Biarritz in August 1951. The Comete didn’t even carry the Ford badge. In an stunning tribute to the advanced pressing and welding techniques of Daninos, the Comete featured beautifully proportioned line that were built on a Ford Vedette floorplan.

1954 Model of Classic car-Ford Comete Monte Carlo

The Comete featured a severe elegance in its silhouette that was offset by huge steel bumpers, and later, a large egg-crate grille. A ribbed stainless steed dashboard and door handles were displayed on the interior, along with an impressive jet-age three-spoked steering wheel. The steering wheel was a tribute to Daninos work on aircraft design..

The Comete came with a single, horizontal bar across the grille with a chromed shield of bullet in the center, very similar to contemporary Studebaker products, along with steel wheels with chromed hubcaps. The engine was originally taken from the Vedette, and its meager 60bhp unimpressed buyers. The Comete was considered to be unreliable and underpowered with its small engine, though the looks and features drew admiration from onlookers. By 1953, the power was increased to 80bhp, and driving was shifted through a 3-speed column change manual gearbox.

1954 Model of red Ford Comete Monte Carlo retro car

The new Comete ‘Monte-Carlo’ model was introduced in 1953, and received a 3.9 L V8 engine that was normally fitted only to Ford trucks. The engine delivered 78 kW (105 hp) and featured plenty of torque. The public wasn’t a big fan of the new engine, as it was not only known as a ‘truck engine’, but its large engine displacement meant its tax horsepower that was rated at 22CV, making for high road taxes. The ‘Monte-Carlo’ model came with a fake hood scoop, wire wheels, and a typical Ford egg-crate grille. This vertical and horizontal equally spaced bar grille was called a ‘coupe-frites’ or a ‘french-fry cutter’ by the French.

Under the hood was a 3.9 liter V8 Ford Mistral engine that produced 105bhp. This model was capable of 95mph, despite an increase in weight.

A total of 2,165 Cometes were produced during its production run, with 699 of them being Monte Carlos.
Ford SAF was taken over by Simca during the Comete’s production, and for 1955, the final year for the Comete was produced under the Simca name.